"Just a quick line on the kit I purchased from you. We struggled with broken bolts for 15 years or sent
things to the machine shop to have them removed. In the last three months I have used your kit six times.
The labor savings have been tremendous. One of such instances even saved removing the head from an engine.
Thanks again for a great product!"
"I wanted to inform you of the repair cost savings using your tooling. The application was a 1996 GMC Truck with a Caterpillar 3116 Engine.
The exhaust manifold bolts on Cyl. #6 were broke off in the cylinder head casting. Due to the location and cab configuration, access
clearance was only 5 inches and boxed in by the right cab mount. By using your fixture, right angle drill and mirror, I was able to
perfectly drill out the bolt dead on center and at a 90 degree right angle to the gasket surface with no damage to the threads in the
cylinder head casting. Without this tooling, the cylinder head would have to be removed to drill out the bolts.
The labor, 17.5 hours @ $66.00/hour and $298.00 for the gasket set are a total of $1,453.00.
This savings almost paid for the tool three times, not to mention
the savings in down time."
Jackson Truck Service
"I wanted to express on how pleased we are with your Broken Bolt Extraction tool we purchased last month. Dunigan Brothers, being in the heavy
construction business for 57 years, is always looking for tools and products that can help us be more efficient and profitable. Your tool
has certainly shown it's worth for the investment. It has saved us already in recent jobs. Tom Langley, our head mechanic was able to drill
out twelve 3/8" bolts in two hours, which is a great savings in labor time. We're also glad we purchased the master kit, as much of our
equipment is coming with both Standard and Metric bolts. We believe the quality of the kit will give us many years of performance, furthering
the benefit of the investment. Congratulations on a fine tool and much success to you in the future."
Dunigan Bros., Inc.
"I would like to relate my introduction to this new stud removal tool. By pure luck, Chuck and I were discussing his new tool in my office
when I was paged and told that a front end loader on a a job site had sheared some bolts off a lever. Chuck and my mechanic went to the
job site where the equipment was broken down. They were able to drill out the broken bolts on the job site. In less than one hour the front
end loader was back at work, with minimal downtime normally required for such a repair. This tool literally paid for itself the very first
time we used it.
Since then, we have used the tool both in the shop and on job sites and it's a great time saver. We now can get broken bolts out in under
15 minutes by using this tool without any damage to the threads. It is a great tool for us as we have over 80 pieces of equipment to
Belden Asphalt Paving Company, Inc.
Have you ever broke an exhaust manifold bolt on a Cummins ISX motor? Does it take at least 3 hours to take the bolt out? If so, I have the tool for you,
it will cut down on your time and labor.
The tool is made by Fulgham Machine & Tool Co. in Jackson, MI. Chuck Fulgham took the time from his busy schedule
to come down to our shop and made us a tool specifically for the problems we encountered cracking two cylinder heads by trying to drill and extract
the bolts out, breaking several drill bits and cutting our time down to virtually nothing.
This tool only designed only for the ISX motor, bolts right up to
the exhaust manifold. You can drill out any bolt hole you need without moving the tool around. Now instead of taking at least 3 hours it only takes
us about 15 minutes to drill out the bolts. This frees up a lot of our time, saves us money on drill bits, and saves us on purchasing new cylinder heads
which can cost $2500.00 per head.
This tool is something that any garage should invest in. In the long run the tool will pay for itself at least 10 times
over. Our company is very grateful for Chuck taking the time to make this tool for us.
Jason lsaacs - 2nd shift supervisor
Motor Carrier Service, Inc.
Use this tool for your broken bolt problems and save thousands of dollars on maintenance bills and equipment downtime!
Many industries are already using this new tool to solve their broken bolt problems. Many industries have yet to benefit from this tool
as well. If you have an issue with a broken bolt, contact us today!
Uses of the Broken Bolt Extractor Include: